Seismic Geophone 1Hz Horizontal terminated with Split Spring connector
It is a new low-frequency, high-sensitivity geophone ; widely used in deep seismic exploration, engineering pulsation measurement and other vibration analysis fields; each type has both traverse and longitudinal wave movements, which can be used flexibly.
| Type | Single Geophone 1Hz |
| Geophone Direction | Vertical Direction / Horizontal Direction |
| Geophone Type | 1Hz |
| Geophone Case | Waterproof Land Case |
| Spike | Steel Spike length75mm |
| Lead-in |
Standard:1mlead-in with O.D.4.6mm Custom Outer Diameter / Lead Distance available |
| Connector Type |
*Mueller Clips *Split Spring Clip *KCK Connector( Male or Female / Push Fit or Lock Ring Type) *Kooter Connector( Male or Female /KCL male or KCL female or KC2L-4 Dual ) *Other Connector Type available |
Single geophone 1Hz Horizontal in land case with spike 75mm, with 1m leader cable,with one D-Loop , terminated with Split Spring connector.
| Type | Geophone 1Hz |
| Working Direction | Vertical or Horizontal |
| Nature Frequency Hz | 1±10% |
| Damping | 0.36±20% |
| Sensitivity(80 Hz)v/m/s | 200±10% |
| DC Resistance Ω | 3300±10% |
| Distortion % | ≤0.2 |
| Insulation Resistance MΩ | ＞50 |
| Moving Mass g | 770 |
| Max. Motion mm(p-p) | 6 |
| Working Temperature ℃ | -25～55 |
| Dimensions mm | φ65×106 |
| Weight g | 1400 |
| Case Dimension mm |
Vertical:φ75×166 Horizontal:75×75×166 |
All parameters specified here in are rated at a temperature 20℃±2℃ .
